Honda Goldwing Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
91 Posts
Discussion Starter #1
I bought a new replacement for the Starter/ Cruise, Shut off cluster on the right handlebar - the whole unit all together.
What is involved in replacing this mechanism, The throttle cables run up in there - that's the part I was concerned about. It looks like the wires just plug into existing plugs - so that part looks easy. How do the cables & throttle come off & go back on?
Thanks in advance for any help.
 

·
Administrator
Joined
·
26,270 Posts
Have you got a shop manual for the bike? You can download one from Wing docs I think. Other choice is I can see what I can find online, but I highly recommend the manual.
 

·
Registered
Joined
·
691 Posts
Thats the hardest part of the job. I re-conditiond mine lasrt week in about 2 hrs. Be sure to loiosen the throttle cable adjustment to give you some slack. Take care to not damage the cables or the part they go into. Nice time to lube them while you have them out.
 
1 - 3 of 3 Posts
Top