Honda Goldwing Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
I just got the park-n-move for my gold wing and I remember someone posting about how hard it is to put the bike on it's center stand. I also found it very difficult so I came up with a solution. Drive the front wheel onto a piece of 3/4 inch plywood. This raises the bike enough to make it go onto the center stand on top of the park n move but is low enough that you can still use the side stand to get off the bike after driving onto the plywood.
 

·
Administrator
Joined
·
26,266 Posts
Yup, works like a charm. Lots of riders use a piece under both wheels...even better.
 

·
Registered
Joined
·
20 Posts
Sledgehammer,

I have found that it is easier to place my 1800 on the centerstand with the preload set to 25. This may help with a Park n Move. I would be curious to find out if this helps with the Park n Move because I have a space problem and I am thinking of purchasing a Park n Move.

They make a 2" wheel version just for the GoldWing. Is this the version that you have?
 

·
Super Moderator
Joined
·
11,809 Posts
OK, how do you get the bike off the thing?
 
1 - 8 of 8 Posts
Top