Honda Goldwing Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Banned
Joined
·
2,921 Posts
well, where the yellow wires join in the plastic plug, you need to remove the wires from the plug, remove the metal connectors, strip the wires, slide shrink tubing over either the top or bottom wire, twist the wires together making a single long strand, prep with flux, use electronic solder with a rosin core, I take the solder and wrap it around the wire joint and heat with the soldering iron, let it cool and test the joint to make sure it doesn't come apart, slide the shrink tube over and heat to seal. Repeat on the other two wires.




:)
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top