Honda Goldwing Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
24,190 Posts
Poncho: The pictures are proof positive. I will stop by " Trac Auto " this week and look for a comparable unite to fit your design. In regards to your last statement " Bring on the cheap jokes": You will recall that I worked in a biomedical lab back in the late '70 to early '80. Three of us ( Jay , myself and kevin ) used the available laboratory hardware to design what we termed a " MasterBlaster ". We did not patent the design but I think the idea caught on and we can see it today in variations. Imitation is flattery............
 

·
Premium Member
Joined
·
24,190 Posts
It doesn't look to deep, be careful going over a bump. I have one I got that is designed for a bicycle, price was $10.00. I modified it a little, It comes with a Velcro strap that goes around the bicycle handlebars, I took that off and put a screw through the hole and mount it to the clamp that holds the brake reservoir to the bike. It's adjustable and the bottom twists to hold the container tight

Good cheap variations on the same theme ! A little barnstorming to get the mooses flowing!!
 

·
Premium Member
Joined
·
24,190 Posts
Time to kick some " gas " , Poncho. I'll be riding out on Sunday, should be in the upper 50's. My neighborhood riding buddies both have their bikes up for the winter. One has a 1300 VTX and the other a FatBoy. Won't see them until the spring. This is the problem with upgrading, you can find yourself alone at the top.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top