Honda Goldwing Forum banner
Status
Not open for further replies.
1 - 6 of 6 Posts

·
Banned
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi , I got two sets of helmet headset for my goldwing gl1800 but , they do not work , I check the installation and everything seems to be ok , the speakers work very good ,but nothing from the headset , maybe I'm missing something , please , can anybody help me ??.
 

·
Administrator
Joined
·
29,023 Posts
Don't have an 1800 but I'm guessing you have a speaker/headset button you need to push. We have them on the 1500 so that's this ole Fossil's bet.

By the way welcome to the GWOF.
 

·
Super Moderator
Joined
·
15,167 Posts
Don't have an 1800 but I'm guessing you have a speaker/headset button you need to push. We have them on the 1500 so that's this ole Fossil's bet.

By the way welcome to the GWOF.
got a speaker/headset button on the 1200's too
 

·
Registered
Joined
·
2,218 Posts
AUDIO button, top one on the left, push it and release it, that switches audio from outside speakers to helmet speakers, also the CB button does the same thing for the CB,
There are many other functions that the volume and station knobs do, If you have an owners manual, I would suggest you read it.
 

·
Super Moderator
Joined
·
10,007 Posts
Did you check the pins on the conector to see if any are bent, broken or missing?
 

·
Premium Member
Joined
·
24,630 Posts
Welcome to the site pilotowinger. If you are afraid of your dealer, use that as an excuse to go on a jaunt (sorry, dunno where you're at) to another dealer. Ask for the service writer and explain your plight. He may just offer to have a look at it for you and check all the controls, connections, settings and such. Obviously if he has to put it in the shop there would be a charge, but he might find something you overlooked and we haven't twigged on (there are lots of settings to confuse a new owner with) and with a simple touch of a button all could be fine. Worst that can happen is you get a ride out of it and he tells you that he has to have a shop tech look at it on a (you pay) work order. You can always say no to the shop looking at it.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top