The guy that did the pin stripping is in Riverside, his information is
McPeak Painting & Pinstriping
1237 W la Cadena Dr
Riverside, CA 92501
Sorry to hear about the accident, were you on the bike at the time? I bougyt an 02 after you bought mine and then last year I bought an 08. I had the 08 for 2 months and I was in Utah and a guy on a Harley tried to pass me on a curve, he was doing about 70, I pulled over to the right shoulder to let him pass and I was doing about 45, he started to pass but I think he got scared and put his brakes on, well the rear brake locked up and hit me, he slid sideways into the rear of my 2 month old bike, knocked the back wheel out from underneath me and into the dirt shoulder, I kept the front wheel on the backtop as the bike was slidding on it's left crash bars, and got it stopped with out crashing it. He and his wife were both hurt pretty bad. She will never be the same but he healed O.K. I rode the bike home from Utah, it was only plastis that was damaged, no frame or wheel damage, took it to the shop and after $7,000 worth of repairs it is good as new.
Let me know if I can be of any help locating parts. Are you fixing it your self? If so you might try trike manufacturers for the saddle bags, or e-bay. Here is my 08 today, all better from the accident. The same guy stripped this bike also.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.