|Topic Review (Newest First)|
|08-23-2019 08:28 PM|
|ironhorse54||Taly Hooooooo Mon.|
|08-23-2019 05:15 PM|
|[email protected]||Welcome Mike: I'm a Jr Member and recently bought my first GW. The folks here are quite knowledgeable about these great bikes. Sorry to hear about your trike. Hope all works out...|
|08-23-2019 10:59 AM|
First off welcome, but sorry for your plight. Thanks to Dan and trike lady for the input and advice for your issue.
Since it's a trike conversion, the onus isn't really all Honda's, but also the conversion manufacturer's for making your life miserable. In Honda's defense, they didn't design Wings to have three wheels, someone else modified the machine and that's where things get kind of sideways. We love our two wheel Accords, but one of the issues for repairs and maintenance is a result of condensing a very well equipped four wheel people mover onto two wheels in as compact and tidy a fashion as possible. Add in a chassis rework and there you have it. Hope you have as little as possible trouble getting things back in order soon.
|08-23-2019 10:32 AM|
Welcome from UT.
Honda put an extension tube with the bleeder fitting for flushing the slave cylinder of fluid in on the left side. That is what you are seeing in the videos. The slave cylinder itself on the 1500 has always been where yours is. If you remove the exhaust pipes and then the crossover chamber, this will give you more room. Jacking the rear of the bike up will just give you more room to work. I did not have to crawl under mine (non trike) when I did work in this area. I did everything on the center stand. You just have to remove some parts to get better access.
|08-23-2019 07:27 AM|
|Two Wheel Wing||Welcome to the GWOF from Pennsylvania.|
|08-22-2019 09:23 PM|
How did someone manager to put the clutch slave cylinder in a different location? They are normally mounted on the clutch cover. Now the rear brake master cylinder that can be a P.I.T.A. to find on some conversions.
Do you have a service manual for the trike? If not this may help: https://www.manualslib.com/manual/81...age=232#manual
|08-22-2019 09:08 PM|
|NREMTP||Welcome to the forum. We do have some trike experts on here and they should be along shortly to offer help.|
|08-22-2019 06:29 PM|
|Ron Robertson||Never had o get to my slave cylinder. But if you have to get under the bike, you might ry running the front wheel up on a block using a ramp to get it there.|
|08-22-2019 04:13 PM|
Im beginning to dislike HONDA
I'm Mike, 66 and retired. Ive got a 94 goldwing trike that has been very reliable until receintly.
Replaced the driveshaft Monday, took it for a ride and the clutch slave cylinder blew a gasket.
I noticed that in the videos I could find, most of the slave cylinders were located on the left side of
the bike, but mine is in the middle, and you can get to it from the bottom. Im not fond of jacking up
a heavy trike and crawling under it, jack stands or not.