Honda Goldwing Forums - View Single Post - Ignition Pulse Generator Replacement 2013 F6B
View Single Post
post #8 of (permalink) Old 04-23-2019, 09:27 AM
armsrn
Senior Member
 
armsrn's Avatar
 
Join Date: Apr 2010
Location: Kimberley British Columbia Canada
Posts: 260
Hey kellar
When your bike doesn't want to start try wiggling the wire going into the timing cover
I would do that and it would start
I had check everything else as you read
I just pulled the wires out a bit from the front
Removed the timing cover
You may have to tap on it a bit
Replaced the pulse generator
Cut and spliced the wires ( I used heat shrink type connectors)
Clean up the cover
I used spray a gasket (Permtex) to hold the gasket in place
Installed and torque to spec
A lot easier than tearing the the shelter off
That was 2 years ago
Let me know how you make out
Enjoy


every day is a good day.....some are just gooder than others
armsrn is offline  
 
 
For the best viewing experience please update your browser to Google Chrome