Well i am new here and i was told that this is the best place for help...well to make it short, my 2008 goldwing fell over on my car,,i know dont ask********so it bent or pushed up my right side mirror, it only broke the glass, so i took off the whole mirror, i see that the main bracket is bent, how in the world do you get it out of there? I have taken the cover off the windsheild but ...dont know. Any help from a wise one?

Thank you, carl

Hello and welcome to the forum, your assistance tonight comes from Ormond Beach.
You lift the rubber boot around the mirror base that is tabbed to the meter panel visor and front fairing and you'll see three screws where it mounts to the fairing undo them and disconnect the turn signal connector. The screws are under the rubber boot.

ok, i got that far, now i need to get that main mount base out, it looks like the whole farring has to come off that right side...:confused:

Okay, this is a scan from the service manual for the right side mirror and how to remove it from the bike.

i have all that done, now its the main mount that holds the mirror mount...

You've got the mirror off in it's entirety. If the piece I'm thinking got damaged means removal of the front garnish.
http://a2.bikebandit.com/assets/schematics/Honda/HJ04060013071.gif
This is what you'll find when you remove the garnish. Without seeing a photo I'm going to assume the #28 got bent (assume, we all know what that means), unless there is something I am missing.

It's 12:04 am can you post a pic for me, so I can see what's happened.
I have classes in the morning. I would certainly like to help you.
Something told me before I turn in to provide you with the following parts manual.
http://www.goldwingdocs.com/Docs/Honda%20Goldwing%20GL1800%202005%20to%202008%20Par ts%20Catalog-E90FB.pdf

OMG, THATS IT, I HAVE DONE ALL I KNOW TO DO...OH GOD, THATS LIKE DOING HEART OPERATION...:eek:

my mirror needs replacement to carl so i know how you feel but i have to take my wing in to have the rear tire replaced so they may as well replace the mirror to

If you managed to bend this piece on part number 2, that was a solid hit. I had a friend who managed to over turn his trike and that piece didn't get bent, but the mirror was mangled.

Well, tugustine today, the part I need is $158.00 and labor to R&R it is 2.5 hours...they do not sell the mirror by it self so I need to buy the mirror now...yes it was the only thing that it my GTO drivers door,,I did try to bend it down, no luck...:(

Ouch. That's a pretty robust piece to bend. Try a few places on the net for OEM Wing parts. http://www.hondapartsnation.com/ www.bikebandit.com http://fiche.worldofpowersports.com/wps/partsfinder.htm
You may be able to get the mirror assembly for less at these places.