emsav8r
05-05-2009, 08:07 AM
I have an 09 Wing and the rear part of the front fender is less than 1/8" from the tire. Not enough room to fit the fender extender I bought. Just wondering if anyone else had run into this?
|
detdrbuzzard 05-05-2009, 08:07 PM hello and welcome to GWOF emsav8r, i just added a fender extension to my 1200 and it would have been easier to do the job with the fender off the bike emsav8r 05-06-2009, 07:43 AM Instuctions are to remove fender for installation but then it wouldn't fit when I try to reinstall it ith the extender on the inside of the fender. joe in calif 08-22-2009, 07:06 AM The fender extender goes on the outside of the fender, there is room, and you don't need to remove the fender, just put a piece of plywood between the fender and tire when you drill the holes, and be carefull.Here it is on my 08 http://im1.shutterfly.com/media/47b9d603b3127ccec7b8d1ed694400000040O01CcNWzly0Yg9 vPhw/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/ http://im1.shutterfly.com/media/47b9d603b3127ccec7b82670293a00000040O01CcNWzly0Yg9 vPhw/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/ | ||